Domestic Concrete

Our domestic concrete services offer a wide range of products. No job is too big or small and we do each job with the same amount of professionalism and dedication. We have listed some of our domestic concrete services below.

  • Driveways
  • Pathways
  • New house slabs
  • Car port slabs
  • Pool and surrounds
  • Retaining walls
  • Decorative finishes
  • Stencil concrete
  • Re-sealing or colour sealing
  • Curing
  • Alfresco patio areas
  • Entrance steps and stairs
  • House renovations
  • Architectural features
  • Landscape features
  • Footings and foundations
  • Concrete resurfacing
  • Drainage and stormwater
  • Steel fixing





Exposed Aggregate

Exposed Aggregate Concrete is a very popular and fashionable decorative finish, it is used at most display homes.

The finish is not smooth, rather the aggregate (stone/pebbles) are exposed which makes it rough and gravelly. However the aggregate is quite fine making it comfortable to walk on with bare feet.

Exposed Aggregate Concrete is a standard grey or off white cement mixture with a select type of customised small aggregate (stones/pebbles) and will sometimes have a colour oxide mixed through (mixed through at concrete plant). It is finished with a high pressure blast exposing the aggregate materials (stones/pebbles) on the surface.

All concrete paving must be treated with construction joins/cuts to minimise cracking. Spacing of these joins/cuts will be site and design specific.

Sealing of any paved area is highly recommended to minimise fading, staining and cracking.


Plain Concrete

You will be familiar with this finish from regular footpaths and kerbs.

Plain Concrete is a standard grey cement mixture. It is finished with a "Stipple" creating a slightly textured finish with no aggregate (stones) showing on the surface - A smooth or polished concrete finish is not suitable for paving outdoors as it would create a slippery hazardous surface.

This type of concrete is the cheapest option offered by Hume & Sons Concreting.

All concrete paving must be treated with construction joins/cuts to minimise cracking. Spacing of these joins/cuts will be site and design specific.

Sealing of any paved area is highly recommended to minimise fading, staining and cracking.


Covercrete (Covacrete)

Covercrete is a spray on product that is used to cover and refurbish old and existing concrete products. This is 2-3 mm thick and sets at approximately 72 MPA, about three times the strength of tradition concrete. 

It is a resurfacing product only and will only be as good as the base below it. Patterns and header-courses can also be added if desired. 

A full range of colours are available. Rosettes and features are also available. A minimum of two coats of UV sealant are mandatory to prevent colour deterioration.


CONTACT US TODAY FOR A QUOTE ON A DOMESTIC CONCRETE PRODUCT!